Installation Guides
⚠️ Important Legal Note:
Mileage Blockers are sold for testing/diagnostic purposes only. Tampering with odometers to misrepresent mileage is illegal in most jurisdictions. By proceeding, you confirm you understand and accept full responsibility for compliant usage.
🔧 Universal Installation Guide (All Models)
Tools Needed:
Phillips screwdriver
Plastic pry tool (included in Pro Kit)
Zip ties (for cable management)
Step-by-Step Process:
Locate Your Vehicle’s ECU
Typically found under dashboard (driver side) or engine bay (consult your car manual)
Connect the Mileage Blocker Module
Plug the device between your speed sensor (VSS) and ECU harness
*Color-coded cables match factory wiring (Red=12V, Black=Ground, Yellow=Signal)*
Secure the Unit
Mount in a dry, vibration-free area using included 3M tape
Route cables away from heat sources
Test Operation
Start engine and verify odometer remains static while driving
Check for dashboard warning lights (should remain off)
📞 Need Professional Help?
We recommend certified installer.
🚨 Troubleshooting
| Problem | Solution |
|---|---|
| Odometer still counting | Check VSS connection (80% of issues) |
| Check Engine light on | Ensure clean harness connection |
| Device not powering on | Verify 12V and ground connections |
🔒 Safety First!
✔ Disconnect battery before installation
✔ Use anti-static wrist strap when handling ECU
✔ Never modify factory wiring permanently
